Home	Forums	What's new	Resources

Need help with my modem

Gear - Sep 19, 2001

1

2

Next>

		Gear		Sep 19, 2001
			I finally got a normal phone line (instead of the cordless that I had) and I can't get my PC modem to work properly. I connects me to internet; but then I can't even get to a small site without waiting more than 6 minutes. The modem is a motorola SM56. I read the manual and put it in v90 and v34, enable/disable error correction, flow control, etc; but nothing worked. I did the same with the windows settings. In the same line I used a 28.8 modem from a laptop I have and it works perfectly. Please help me, I'm clueless with what may be wrong.

		megametalgreymon		Sep 20, 2001
			motorola modem? is it a "software" modem (ie using your cpu to emulate some of the chips to reduce costs) what spec is your pc if so

		IceDigger		Sep 20, 2001
			Yea, buy a hardware modem. Software modem = Headache

		Gear		Sep 20, 2001
			It is a "software" modem. I'm running it in a 750mhz Athlon with 256MB ram and winme. I'd love to buy a full hardware modem; but here these things are pretty "rare" and expensive . And the sites wich I can buy from doesn't send them to my country at a reasonable price. I have just used 3 set of drivers; and still don't get any positive result (even a slight improvement).

		megametalgreymon		Sep 21, 2001
			what speed does the windows dial up networking icon in the taskbar showing as being connected at?

		Gear		Sep 21, 2001
			I get from 38 to 44kbps mostly.

		megametalgreymon		Sep 23, 2001
			maybe its just not a very good isp your using, is it a free one by any chance? (ie where you just pay for calls) you may have a good link between yourself and the isp, but if the isp has a lot of users connected, or very low bendwidth connection to the rest of the web, pages stored on that isp's servers would come up ok, but anything either not cached or on that isp itself would take a while to transfer if you can try a different isp

		Gear		Sep 24, 2001
			I have tried 3 ISPs. One free ISP. The ISP of my tel. co. which I pay with the phone. Another ISP, which a friend borrowed me his account info. Same results in all of them

		megametalgreymon		Sep 24, 2001
			can you try that modem in another pc?

		Gear		Sep 25, 2001
			Ok, I will try this weekend in a friend's pc.

		Gear		Sep 30, 2001
			A friend tried the modem in a 1Ghz P4 (or PIII, I'm not prety sure) with 128MB ram and win98. The modem worked fine there. I have to install win98 (winme crashed down); but still the modem doesn't work in my house. By the way, now my PC has 442MB ram.

		megametalgreymon		Sep 30, 2001
			maybe you will have better luck with win98 over me with the modem, although it shouldnt make a difference if not what resources has it grabbed for the modem?

		CyberWarriorX		Oct 1, 2001
			Those modems are just a real pain(I unfortunately used to own one myself - luckily it died on me so I had to grab a different one). Could be some kind of hardware conflict. You may also want to try adjusting the send and receive buffers to see if that makes a difference. Cyber Warrior X

		Gear		Oct 2, 2001
			I don't remember well which resources takes it. My friend still has it. It were IRQ 9 and a memory interval like D0080000-EFEFFFFF (this is the thing I don't remember well; I remember just the number of digits).

		megametalgreymon		Oct 2, 2001
			thats not going to help with it being on irq 9, the correct irq should be 3 or 4, if your not using the com posrts on your machine, disable them, then install your modem, that should make it grab the correct resources what port is it getting allocated to as well?

		Gear		Oct 2, 2001
			I takes com3 or com4. It changes when I unplug and plug again. And no way I can change it to irq3. Windows doesn't allow me to do that (I already deactivated the other com ports).

		Curtis		Oct 3, 2001
			Yeah, the IRQ's are probable your problem. Newer versions of Windows has the annoying habit of assigning one IRQ to many resources, including graphics cards and sound cards, and it doesn't help having too many devices sharing a single IRQ. Give it a dedicated IRQ (any will do, really) and all should be well.

		megametalgreymon		Oct 3, 2001
			irq 9 really doesnt help, since its supposed to be used by the pc to access the upper irq lines (along with irq2) its not supposed to be used by any devices in the pc at all. look in your bios for a setting for either the com port or irq for the modem (some newer motherboards have this option)

		Gear		Oct 3, 2001
			Shit, I can't change the irq. Neither from bios/motherboard (doesn't have the option) or windows (refuses to let me change any resource). I hate this damned modem so much...

		megametalgreymon		Oct 4, 2001
			i dont really see what you can do then, other than replacing the modem with a hard ware one with jumpers for the port/irq or getting an external modem (which is what i did about 2 years ago when i had a similar problem) is either irq 3 or 4 shown as being free in windows device magager (double click on computer to see whats available)

1

2

Next>