HomeForumsWhat's newResources 
 
 
Gameplay Problems after modchip install
Hiroshirou - Feb 5, 2004
  Hiroshirou Feb 5, 2004
well after i installed my modchip i got from jandaman, (i did everything connect the red wire to the 5 volts, linking a-b together (not soldered, just taped a wire to connect to b dot) it could run everything i throw at it with no problems.. but when i played radiant silver gun, theres a problem with the sound.. i could hear the sound effects and music playing but there are no voice =/ now when i didnt have modchip, i could hear all three =/ now i couldnt .. whats the problem? should i solder a-b together instead of being held by just a piece of electrical tape?

 Scared0o0Rabbit Feb 5, 2004
yes you should solder it. But I dunno if that's what's causing the problem.

 KuKzz Feb 6, 2004
Voices in RS are recorded as CD-Audio, but I have no idea why your Saturn doesn't play them. Try another game with CD-audio BGM and see if it's your saturn/modchip or RS disk....

 IBarracudaI Feb 6, 2004
uh... i recall an old thread about this, someone was having the exact same problem, no cdda tracks were played.

I don't remember exactly how they solved it, but I think it was some short between those pins on the side of the modboard, check if none of them are touching each other and not touching saturn's metal 'cover'.

 Hiroshirou Feb 6, 2004

  
	
	

		
		

			Originally posted by KuKzz@Feb 6, 2004 @ 08:31 AM



 Voices in RS are recorded as CD-Audio, but I have no idea why your Saturn doesn't play them. Try another game with CD-audio BGM and see if it's your saturn/modchip or RS disk....


i got two copies of the game, one is japanese original and the other is soft region modded.

baracudda: id like to see this thread, is it still alive? , the modboard is so wide its touching the metal covers of saturn, so i insulated the sides of it now, so it wouldnt touch the metal side.. none of the pins is touching each other either so im gonna try it now... will edit this post if its succesful..

 Hiroshirou Feb 10, 2004
turns out there was one speck of lead in between the pins....... i scratched it out.. now it works! thanks for the heads-up on pins check barracuda

 IBarracudaI Feb 10, 2004


Glad it works!