Home	Forums	What's new	Resources

Can someone help me with modding my Saturn?

Johnny_Big - Oct 17, 2003

		Johnny_Big		Oct 17, 2003
			Okay...let me get this straight... I don't understand what is 0014 and 0019 bridge and if I have a 64 pin ribbon and a 21 pin model...and I don't know where to begin...so I am asking help...is there a topic or a site that tells me how to install a modchip(from Jandaman) in my Saturn? *Prays to don't get anything to solder* P.S.- The only thing I know is that my saturn has round buttons in power and reset...is this good... And the swap trick is dangerous? Hope you guys can help a desperate boy here!!

		IBarracudaI		Oct 17, 2003
			Try reading this.... you will have to open your saturn to find out if it has 32-pin or 64-pin ICs... <_<

		Johnny_Big		Oct 17, 2003
			Trying that tomorrow if you can tell me another thing... a friend of mine who has a modchip opened his saturn but when he put it again he lost his internal data...and his batteries weren't dead(that is what he told me), and I don't have a cartridge, and I have Shining Force III Scenario I in the internal memory(my batteries have 6 months), and I don't wanna risk...can it delete internal data?

		IBarracudaI		Oct 17, 2003
			I've modded several saturns, and none lost the internal mem...

		Johnny_Big		Oct 17, 2003
			ok tnx...last question... what is the difference between 0014 and 0019(I know what it is already)? And yes...I am a newbie and a dumb :smash CHEERS! :cheers

		Scared0o0Rabbit		Oct 17, 2003
			I have systems routinely erase the memory when I install aregion switch... but not a mod board.

		IBarracudaI		Oct 17, 2003
			Probably when installing region switch some lines get shorted or something, and saturn's mem gets messed up.. 0014 and 0019, don't bother with that.. leave it in 0014 "default mode" :lol:

		Johnny_Big		Oct 18, 2003
			I believe this is good...I have a 32 pin saturn...with pins up and down...is this right? And now what?

		NR Pickle		Oct 18, 2003
			If you have the 32 pin and the round buttons and a 21 pin cable you are basically good to go and can probably mod in like 5 minutes. You can order a chip here http://www.jandaman.com...

		Johnny_Big		Oct 18, 2003
			yo...i got the jandaman mod...but at some sites i saw they said pluging, not solding, can I plug and play instead of solding?

		mal		Oct 18, 2003
			To get the Saturn to work reliably you're going to have to do at least some soldering. As IBarracudaI said, read this.... It may save you asking a lot more questions.