HomeForumsWhat's newResources 
 
 
Adding S-Video to JVC X'eye
dhau - Feb 5, 2009
  dhau Feb 5, 2009
I just tried viletim's simplified video amp... on X'eye, and it's a success!

Here is the amp in case if link don't work:

Code: 
  
.           | +5v

.           |

.           |

.video   | / c  

.in   ---|< 

.        | \ e

.      NPN  |   27   video

.           +--RRR--- out

Output was a bit weird when I was tapping ground from composite video jack, so I moved it to gnd pin of CXA1145, and it got normal. According to viletim, any general purpose NPN transistors will work. I used BC548B and 33 Ohm resistors (what I had).